SEA WALL SEALER by TRIDENT (8409)

2026-02-24T09:36:29-05:00

Vendor: Trident SEK
Type: Paver Sealer
Price: 395.00

Sea Wall is a high-performance silane/siloxane blend that protects the surface from water penetration, salt & freeze/thaw damage. Its advanced reactive chemistry and EZ Nano Technology provides the ultimate in surface protection. Sea Wall is a solvent based invisible penetrating sealer.

FEATURES

ADVANCED REACTIVE CHEMISTRY AND EZ NANO TECHNOLOGY

Provides ultimate surface protection against water and salt infiltration

Prevents surface spalling caused by freeze/thaw environments

SUPERIOR WATER REPELLENCY

Inhibits biological growth such as mold, moss & algae

HIGH PERFORMANCE SILANE/SILOXANE BLEND

Does not contain any silicone or wax components

BREATHABLE, IMMEDIATE APPLICATION

Will not trap naturally occurring efflorescence and/or moisture

Can be applied on a new, clean and dry surface without waiting* (see Surface Preparation in application instructions)

EASY TO APPLY

Applies easily on dry or damp surfaces

Apply two coats wet-on-wet for optimal performance

INVISIBLE PENETRATING SOLVSENT BASED SEALER

Does not alter the appearance of the surface (some surfaces may darken slightly)

Non-film forming

Consistency of water and clear in appearance when applied. Dries transparent.

TEMPERATURE STABLE

Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C)

IDEAL APPLICATIONS

Driveways, Walk Ways/Stairs, Garage Floors, Industrial Flooring, Building Entrances, Shopping Malls, Restaurant Drive-Thrus, Dumpster Pads

Any high use hardscape surface where protection from water and salt are important.

SUITABLE SURFACES

CONCRETE

STAMPED CONCRETE

CONCRETE WALL BLOCK

CLAY PAVERS

NATURAL STONE

MANUFACTURED STONE

TRAVERTINE

EXPOSED AGGREGATE

GROUT

Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. Do not use on asphalt. Performance may vary on limestone. Test first to verify performance and appearance before applying.

PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance.

COVERAGE PER GALLON

PAVERS & OTHER HARDSCAPE SURFACES

75-200 square feet

7 - 18.6 square meters

CONCRETE

100-200 square feet

9.3-18.6 square meters

RETAINING WALLS & OTHER VERTICAL SURFACES

50-200 square feet

4.6-18.6 square meters

Coverage based on two coats applied wet-on-wet at right angles to first coat. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature.